Oven and range repair in Tampa Bay, FL
Your oven stops heating the night before Thanksgiving, or the igniter clicks but never lights. Perfect Appliance Repair Tampa fixes gas and electric ovens, freestanding ranges, slide-in ranges, wall ovens, and double ovens across all Tampa Bay cities. Flat $95 diagnostic fee applied toward repair, upfront parts pricing before we touch anything, 90-day labor warranty on every fix. Call or book online today.
What are the most common oven and range repairs in Tampa Bay?
Most Tampa Bay oven calls come down to four parts: the igniter, the bake heating element, the electronic control board, and the temperature sensor. Igniter replacements run $120–$180 on most GE and Whirlpool gas ranges; bake element swaps on electric units typically cost $95–$150 parts and labor.
Tampa’s Gulf Coast humidity accelerates corrosion on igniter tips and burner ports. Gas ranges in Tampa develop intermittent-ignition problems faster than units in drier climates. A healthy igniter draws 3.2–3.6 amps; anything below 3.2 amps produces slow lighting or a no-light condition. That’s typically the igniter, not a gas supply problem.
Perfect Appliance Repair Tampa stocks common igniters and bake elements on the truck for GE, Whirlpool, and Frigidaire. Most single-part repairs are done in one visit. Call or book online today.
What oven and range types does Perfect Appliance Repair Tampa fix?
Perfect Appliance Repair Tampa services all four major oven and range configurations found in Tampa Bay homes.
- Freestanding range: The most common setup in Tampa Bay. Gas or electric. Igniters, bake elements, and control boards covered for GE, Whirlpool, Samsung, LG, Frigidaire, KitchenAid, and Bosch.
- Slide-in range: Same repairs as freestanding, plus flush-mount trim and cooktop seating issues common after Florida kitchen remodels. Slide-in units require exact OEM parts for proper fit.
- Wall oven: Single and double cavity. Control board failures and temperature calibration are the top repair calls. In Hillsborough County, in-kind appliance swaps don’t require a permit as long as wiring stays within original specs per Florida state contractor licensing requirements.
- Double oven: Upper and lower cavity repairs done in one visit when parts are on hand. KitchenAid and Bosch double ovens use OEM control boards ordered same-day from a Tampa distributor when not stocked on the truck.
Not sure what type you have? Text a photo and Perfect Appliance Repair Tampa will identify it before scheduling.
Which oven and range brands do you repair in Tampa Bay?
Perfect Appliance Repair Tampa works on every major brand sold across the Tampa Bay market.
- GE and GE Profile: Most common brand in Tampa Bay rental properties. Bake elements and igniters stocked on the truck. Most GE repairs under $200.
- Whirlpool and Maytag: Shared WPW10-series control board platforms mean faster cross-brand diagnosis. Most repairs under $200 parts and labor.
- Samsung: Control board failures are the top Samsung range call, often triggered by South Tampa power surges from aging underground utility lines. OEM boards run $140–$220.
- LG: LG ProBake convection units show temperature sensor drift after 3–5 years of Florida heat cycling. Sensor replacement runs $110–$160.
- Frigidaire: Budget-friendly to repair. Most Frigidaire bake elements and igniters are under $60 in parts.
- KitchenAid and Bosch: Premium brands with premium parts costs. Perfect Appliance Repair Tampa gives a repair-vs-replace assessment for any unit over 10 years old before ordering parts.
Don’t see your brand? Perfect Appliance Repair Tampa repairs any brand with available manufacturer parts.
How much does oven and range repair cost in Tampa Bay?
Oven and range repair in Tampa Bay runs $95–$350 for most failures, with the $95 diagnostic fee applied toward the repair if you proceed.
- Diagnostic: $95. Covers full inspection of burners, elements, igniter, control board, and temperature sensor.
- Igniter replacement (gas): $120–$180 parts and labor. Most done in 45 minutes.
- Bake element replacement (electric): $95–$150 parts and labor. Element draws 2,400–3,400 watts; a cracked element is a fire risk, not just a heating issue.
- Temperature sensor: $110–$160 parts and labor. Fixes uneven baking and temperature runaway conditions.
- Control board: $180–$350 parts and labor. Perfect Appliance Repair Tampa gives upfront OEM vs. aftermarket pricing on every board job.
If the repair estimate exceeds 50% of the unit’s current replacement value, Perfect Appliance Repair Tampa will say so before you commit. The diagnostic fee is waived on a same-day replacement referral. No upsell, no pressure.
What Tampa Bay cities does Perfect Appliance Repair Tampa serve?
Perfect Appliance Repair Tampa serves Hillsborough, Pinellas, and Pasco counties with same-day scheduling in most of the Tampa Bay service area.
Perfect Appliance Repair Tampa’s primary service cities include St. Petersburg, Clearwater, Brandon, Wesley Chapel, Riverview, Lutz, Land O’ Lakes, New Port Richey, Dunedin, Safety Harbor, and Palm Harbor. Hernando County (Spring Hill) is covered on a next-day schedule.
Clearwater and Dunedin coastal homes see more gas range igniter failures from salt-air corrosion on burner ports. Wesley Chapel and Land O’ Lakes have newer housing stock built after 2010, so control board failures on units under five years old are disproportionately common there. Perfect Appliance Repair Tampa adjusts on-truck parts inventory based on which zip codes are running hot each month.
Frequently asked questions
How much does it cost to repair a gas oven igniter in Tampa Bay?
Gas igniter replacement in Tampa Bay runs $120u2013$180 parts and labor through Perfect Appliance Repair Tampa. Most igniter jobs take 45 minutes. The $95 diagnostic fee is applied toward the repair if you proceed.
Is it worth repairing a 10-year-old oven or range?
Perfect Appliance Repair Tampa uses a 50% rule: if repair cost exceeds half the unit's replacement value, replacement usually makes more sense. For a $400 range, any repair over $200 is borderline. The tech will give you that math before you commit.
How long does oven and range repair take in Tampa?
Single-part repairs (igniters, bake elements, temperature sensors) take 45u201390 minutes in one visit. Control board replacements take 60u201390 minutes. Parts not on the truck are ordered same-day; Perfect Appliance Repair Tampa schedules a return visit within 1u20132 business days.
Can you repair a Samsung range control board in Tampa Bay?
Yes. Samsung control board failures are the most common board repair Perfect Appliance Repair Tampa handles in South Tampa. OEM replacement boards run $140u2013$220 and are ordered same-day from a Tampa-area distributor when not on the truck.
Why does my electric oven heat unevenly?
Uneven heating in a Tampa Bay electric oven is usually a failing bake element or a drifting temperature sensor. A bake element draws 2,400u20133,400 watts; when it starts arcing or develops a cold spot, temperature distribution fails. Temperature sensor replacement runs $110u2013$160 at Perfect Appliance Repair Tampa.
Do you repair wall ovens in Tampa Bay?
Yes. Perfect Appliance Repair Tampa services both single and double wall ovens. Common repairs include control board replacement, heating element swaps, and temperature calibration. In Hillsborough County, in-kind appliance swaps don't require a permit as long as wiring stays within original specs.
What is the service call fee for oven repair in Tampa?
Perfect Appliance Repair Tampa charges a $95 diagnostic fee that covers a full inspection of burners, elements, igniter, control board, and temperature sensor. That $95 applies toward the repair if you proceed. If you decline the repair, you pay the diagnostic only.